Compliance Apps

PCI-Express Compliance Test

Revision 1.0, December, 2009
By: ASA
Free

Description

Using the PCI-Express Compliance Test M1 Waveform Tools provides you with an expert solution to your compliance testing needs. M1 Waveform Tools is compatible with every real-time Keysight/Agilent, Tektronix, LeCroy, Rohde & Schwarz, and Yokogawa scope on the market, including the new Keysight/Agilent 90000 and Tek 70000 series. In addition, M1 supports digitizers manufactured by Keysight/Agilent/Acqiris, GaGe,  National Instruments, Spectrum, and ZTEC.

By going with the M1 solution, if you don't meet your numbers you have the full power of M1 available to figure out what the problem is. If you need help, you can collaborate instantly by packaging up your waveform and sending it to your local signal integrity guru.

Most major signal standards are included, for free, with every installation of M1. Regardless of what standard you are working with, you will be ready to begin testing immediately with M1.

Specifications/Details

Spec Level:      Base Specification Revision 2.0, 20 December, 2006; Base Specification and CEM Specification Revision 1.0a, 15 April, 2003

App Update Level/Date:      1.0, December 2009

Best Practices Revision Level:      4

Minimum M1 version required:      v4.00

App Encryption:     none

Measurements Made:     

Our PCI-Express Compliance Test for PCIe 2.0 will test the following tables in the 2.0 specification:

  • Table 4-9: 2.5 and 5.0 GT/s Transmitter Specifications
  • Table 4-10: 5.0 GT/s Limits for Common Refclk Rx Architecture
  • Table 4-11: 5.0 GT/s Tolerancing Limits for Data Clocked Rx Architecture
  • Table 4-12: 2.5 and 5.0 GT/s Receiver Specifications
  • Table 4-13: Worst Case Tx Corners for Channel Simulation
  • Table 4-5: Differential Transmitter (TX) Output Specifications
  • Table 4-6: Differential Receiver (RX) Input Specifications
  • Table 2-1: Auxiliary Signal DC Specifications - PERST#, WAKE#, and SMBus (CEM)
  • Table 2-3: DIFF 0.7 V AC Timing Requirements (Zero Delay Mode) (CEM)

Assumptions:

  • Testing will require 2 x single-ended probes

Features

  • Not Applicable for this App

Comments

Feedback

Provide This email address is being protected from spambots. You need JavaScript enabled to view it. to ASA about this App