Compliance Apps

Power Compliance Test

Revision 1.0, December 2013
By: ASA

Free

Description

Using the Power Compliance Test, M1 Waveform Tools provides you with an expert solution to your power testing needs. M1 Waveform Tools is compatible with every real-time Agilent, Tektronix, Teledyne/LeCroy, Rohde & Schwarz, and Yokogawa scope on the market. In addition, M1 supports digitizers manufactured by Agilent/Acqiris, GaGe,  National Instruments, Spectrum, and ZTEC as well as simulated waveforms produced by any EDA tool from Synopsys, Mentor Graphics, Cadence, Ansoft, or others.

By going with the M1 solution, if you don't meet your numbers you have the full power of M1 available to figure out what the problem is. If you need help, you can collaborate instantly by packaging up your waveform and sending it to your local power guru.

 

Specifications/Details

Spec Level:      EN 61000-3-2 / MIL-STD-1399

Best Practices Revision Level:      6.04

Minimum M1 version required:      v7.03

Measurements Made:     

  • Inrush Current
  • Power Quality
  • Current Harmonics
  • Turn On / Turn Off time
  • Power Efficiency
  • Output Ripple
  • Output Spectrum
  • Transient Response
  • Switching Loss
  • Slew Rate
  • Dynamic On-Resistance
  • Modulation

Assumptions:

  • Testing will require 2 x current probes and 2 voltage probes.

Comments

Feedback

Provide This email address is being protected from spambots. You need JavaScript enabled to view it. to ASA about this App