Compliance Apps

10 Gigabit Ethernet Compliance Test

Revision 1.0, December, 2009
By: ASA

Free

Description

Using the 10 Gigabit Ethernet Compliance Test M1 Waveform Tools provides you with an expert solution to your compliance testing needs. M1 Waveform Tools is compatible with every real-time Keysight/Agilent, Tektronix, LeCroy, Rohde & Schwarz, and Yokogawa scope on the market, including the new Keysight/Agilent 90000 and Tek 70000 series. In addition, M1 supports digitizers manufactured by Keysight/Agilent/Acqiris, GaGe,  National Instruments, Spectrum, and ZTEC.

By going with the M1 solution, if you don't meet your numbers you have the full power of M1 available to figure out what the problem is. If you need help, you can collaborate instantly by packaging up your waveform and sending it to your local signal integrity guru.

Most major signal standards are included, for free, with every installation of M1. Regardless of what standard you are working with, you will be ready to begin testing immediately with M1.

Specifications/Details

Spec Level:      802.3-2008

App Update Level/Date:      1.0, August 2010

Best Practices Revision Level:      6.04

Minimum M1 version required:      v6.05.2

App Encryption:      none

Measurements Made:     

  • Maximum output droop
  • Transmitter linearity
  • Transmitter timing jitter
  • Transmitter power spectral density (PSD) and power level
  • Transmitter clock frequency

Assumptions:

  • Testing will require 1 x differential probes and either 2 or 4 single-ended probes.

Comments

Feedback

Provide This email address is being protected from spambots. You need JavaScript enabled to view it. to ASA about this App